Select User" Menu - RK Rose+Krieger MultiControl II duo Montageanleitung

Operating the hand switch with 6 function buttons
Select user menu
Storing memory position
Fig. 134: Storing memory position
Driving to memory position
Fig. 135: Driving to memory position

7.8 "Select user" menu

Selecting a menu
Fig. 136: Selecting a menu
214
2.
3.
Prerequisite:
n The short menu for the hand switch is displayed
1.
Control unit RK MultiControl II duo/RK MultiControl II quadro
Press the button ( ) or the
rent position of the drive to the respective memory position.
ð The drive position has been saved.
Press and hold the
which the position you wish to assume, is saved.
ð The drive stops automatically when the stored memory
position (e.g. 28%) is reached.
The stored memory positions remain in place even
after the control unit has been switched off.
The function allows a user to be selected.
User 1 ( ) is set as the active user in the factory
and is displayed at the top right of the display
screen.
Select the "Select user" menu ( ).
button ( ) to save the cur-
button ( ) or the button ( ), on
Ä Page 170.
20.08.2021