Transport And Storage - RK Rose+Krieger MultiControl II duo Montageanleitung

Transport and storage

4

Transport and storage

Transport inspection
Fig. 17: Transport inspection
Storage
148
Immediately check the delivery upon receipt to ensure that it is
complete and free from transport damage. Report the extent of the
damage to the person responsible and to RK Rose+Krieger GmbH
immediately.
Store control units in the following conditions:
Only place it on a load-bearing substrate.
n
n Avoid any contact with solvent-based paints.
n Do not store in an atmosphere with solvent content.
Storage temperature: -25 - 80 °C
n
Relative humidity: Avoid 30% - 75% condensation.
n
Temperatures below the dew point are not permitted.
n
Ambient air pressure: 700 hPa - 1600 hPa
n
Control unit RK MultiControl II duo/RK MultiControl II quadro
NOTICE!
Damaged control units must not be commissi-
oned!
Deviating environmental conditions must be
approved by RK Rose+Krieger GmbH.
20.08.2021