Deactivate Bus Connection" Menu - RK Rose+Krieger MultiControl II duo Montageanleitung

Operating the hand switch with 6 function buttons
Control menu > Sync-BUS settings menu
Activating the bus connection
Fig. 108: Activating the bus connec-
tion
Carrying out an initialization run
7.5.5.2

"Deactivate BUS connection" menu

200
2.
3.
Control unit RK MultiControl II duo/RK MultiControl II quadro
Press the ( ) button if the number of connected control
units and drives is correct.
If the number is not correct, press the
( ) button.
ð The bus connection has been activated.
Carry out an initialization run
Once the synchronisation bus has been con-
nected, activated and initialized, the hand switch
Ä Page 161 can also be used to
with 2 buttons
operate the bus connection.
To do so, replace the hand switches
This function deactivates the bus system so that a
control unit can be operated individually in the syn-
chronisation bus.
This function cannot be activated when drive group
management is activated.
Ä Page 180.
Ä Page 153.
20.08.2021