RK Rose+Krieger MultiControl II duo Montageanleitung Seite 183

7.5.1.2.1 Activating drive group management when commissioning for the first time
Fig. 65: Setting the language
Fig. 66: Start the initialization
Selecting drive group management
Fig. 67: Configuring drive group man-
agement
20.08.2021
Prerequisite:
n The drives are connected to the MultiControl II quadro
152.
1.
2.
3.
4.
Control unit RK MultiControl II duo/RK MultiControl II quadro
Connect the mains cable to the operator's voltage supply.
Ä Page 179.
Setting the language
ð The message "Please start initialization" is displayed.
Do not start the initialization run despite the
displayed message.
Press the button to select the main menu
Select the menu via "Control" ® "Commissioning" ®
"Configure drive group management" .
ð The message "Specification of drive type for drive group
2" (Fig. 68) is displayed.
Operating the hand switch with 6 function buttons
Control menu > Commissioning menu
Ä Page 169.
Ä Page
183