Change Parameter" Menu - RK Rose+Krieger MultiControl II duo Montageanleitung

Transferring parameters
Fig. 123: "Transfer parameters" menu
Reconnecting the hand switch
Transferring parameters
7.5.8.2

"Change parameter" menu

Advanced password
Select the "Change parameter"
menu
20.08.2021
2.
3.
4.
5.
6.
Control unit RK MultiControl II duo/RK MultiControl II quadro
Press the button to transfer the settings from the control
unit to the hand switch memory.
Disconnect the cable of the hand switch from the control unit
Ä Page 153.
Connect the cable of the hand switch to the control unit to
which you wish to transfer the settings.
Select the menu via "Control" ® "Parameter" ® "Transfer
parameters" .
ð The "Copy set of parameterset" menu (Fig. 123) is dis-
played.
Press the button to transfer the settings from the hand
switch memory to the control unit.
ð The control unit settings are transferred.
The menu is only displayed if the advanced pass-
word has been set
The advanced password is available on request
from RK Rose+Krieger GmbH.
The function allows you to change the parameters
directly in order to adjust the settings of a control
unit.
Operating the hand switch with 6 function buttons
Control menu > Parameter menu
Ä Page 179.
207