Electrical Hazards; Mechanical Hazards - RK Rose+Krieger MultiControl II duo Montageanleitung

Safety
Residual risks > Mechanical hazards

2.3.2 Electrical hazards

Electric current

2.3.3 Mechanical hazards

Moving components
130 Control unit RK MultiControl II duo/RK MultiControl II quadro
DANGER!
Danger of death due to electric current!
There is an imminent danger of death in the event
of contact with live parts. Damage to the insulation
or individual components can be life-threatening.
– Only have qualified electricians carry out work
on the electrical system.
– Make sure that the mains plug is freely acces-
sible after assembly of the lifting column in the
operator's construction.
– In case of damage to the mains supply cable,
motor cable or other control cables (PLC, PC
etc.) pull the mains plug, remove the control unit
from service and have repairs made.
– Before starting work on live parts of electrical
systems and equipment, isolate them from the
voltage (pull the mains plug) and make sure that
they remain de-energised for the duration of the
work.
– Never bridge or disable fuses. When replacing
fuses, observe the correct current specification.
– Keep moisture away from live parts. Otherwise,
this can lead to a short-circuit.
WARNING!
Risk of crushing and shearing due to moving
components!
Intervening in or accessing the area of moving
components (e.g. height-adjustable table frame)
whose drive is positioned by the control unit, can
cause injuries to the hands and head.
– Before each positioning movement of the drive,
make sure that there are no persons or objects
in the danger area of the drives.
– Never reach into the area or handle moving
parts while the movement is being performed.
– Only carry out work on the drives when they are
at a standstill.
20.08.2021