Delivery/Preparing The Wheelchair For Use - Ottobock Motus CV Gebrauchsanweisung

3 Delivery/Preparing the wheelchair for use

CAUTION
Risk of pinching. Only grip the components shown when folding or collapsing the wheelchair.
Your wheelchair is usually delivered fully assembled with the backrest folded and with the rear
wheels removed.
A few simple steps are sufficient to prepare it for use:
1. Attach rear wheels. To attach the rear wheel, press the button on the quick-release axle,
slide four fingers between the spokes and press the button of the quick-release axle with your
thumb . Then attach the rear wheels to the fittings and the axles will automatically engage.
2. While standing next to the wheelchair, tip it slightly toward you. Press apart the crossbrace
with flat of the hand .
3. Pull the bib of the back upholstery upwards and attach the bib to the wheelchair's seat
upholstery .
4. Insert the seat cushion .
5. Finally, fold down the footplates .
Motus CV/CS
Downloaded from www.Manualslib.com manuals search engine
Delivery/Preparing the wheelchair for use
1
3
2
4
Ottobock | 51