Siemens SINUMERIK 840D Handbuch Seite 288

NC-Maschinendaten
3.1 Allgemeine Maschinendaten
19730 HMI_FUNCTION_MASK
- Bedienoptionen
-
- 2
Beschreibung: Optionsdatum zur Freigabe von HMI-Funktionen:
Bit 0 (LSB): Freigabe "Additional languages" MD19730[0].0
-----:
Bit 2:
Bit 3:
Bit 4:
Bit 5:
MD19730[0].5
Bit 6:
-----:
Bit 8:
Bit 9:
Bit 10:
ced"MD19730[0].10
Bit 11:
Bit 12:
Bit 13:
Bit 14:
MigA; für ShopMill" MD19730[0].14
Bit 15:
MigA; für ShopTurn" MD19730[0].15
Bit 16:
Bit 17:
MD19730[0].17
Bit 18:
Bit 19:
ming"MD19730[0].19
------:
MD19730[0].20
------:
mieren"MD19730[0].21
------:
tieren" MD19730[0].22
Bit 23:
MD19730[0].23
Bit 24:
------:
MD19730[0].25
Bit 26:
ADD ON
Bit 0:
Bit 1:
Bit 2:
Bit 3:
ent)"MD19730[1].3
288
0x804, 0x0 0x804, 0x0
Reserved "external HMI"MD19730[0].1
Freigabe "Network drive management" MD19730[0].2
Freigabe "Multi channel step sequence programming" MD19730[0].3
Freigabe "manual machine"MD19730[0].4
Freigabe "Add. 256 Mbyte HMI user memory on CF-Card of NCU"
Freigabe "Simulation milling (2D dynamic,3D static)"MD19730[0].6
Reserved "measuring cycles" MD19730[0].7
Freigabe "SINUMERIK HMI copy license OA"
Reserved "war Ethernet 802Dsl pro"
Freigabe "ShopTurn/Mill HMI für 840Di sl incl. HMI Advan-
Freigabe "Erweiterte Bedienfunktionen" MD19730[0].11
Freigabe "ShopMill/ShopTurn StepGuide" MD19730[0].12
Freigabe "Kinematik vermessen"MD19730[0].13
Freigabe "Mitzeichnen (Echtzeitsimulation der akt. Bearbeitung)
Freigabe "Mitzeichnen (Echtzeitsimulation der akt. Bearbeitung)
Freigabe "3D-Simulation 1 (Fertigteil)"MD19730[0].16
Freigabe "3D-Simulation 2 (Fertigteil und Arbeitsraum)
Freigabe "Manuelle Maschine Plus" MD19730[0].18
Freigabe "SINUMERIK HMI sl copy license OA program-
Reserved AP61 "SINUMERIK HMI sl copy license OA project"
Reserved AP62 "SINUMERIK HMI sl copy license OA upgrade Program-
Reserved AP63 "SINUMERIK HMI sl copy license OA upgrade Projek-
Freigabe "SINUMERIK HMI sl Runtime OA Easy Screen"
Freigabe "Bedienen ohne SINUMERIK OP"
Reserved "Ladder-Editor für die SoftPLC" für Tiger GA
Freigabe "CCG-Compiler (Nockenschleifen)"MD19730[0].26
Freigabe "MC Information System RCS Host" MD19730[1].0
Freigabe "MC Information System RCS @Event"
Freigabe "MC Information System TPM Machine"
Freigabe "MC Information System TDI IFC (Interface Cli-
N01, N09 -
DWORD POWER ON
0x7FFFFFFF, 3/3
0x7FFFFFFF
MD19730[0].8
MD19730[0].9
MD19730[0].24
Ausführliche Beschreibung der Maschinendaten
I
MD19730[1].1
MD19730[1].2
Listenhandbuch, 02/2012, -