Identification Data; Appliance Id Plate - mectron Compact Piezo LED Installationsanleitung

COMPACT PIEZO LED
Symbol
Rx only
Table 1 – Symbols
2 IDENTIFICATION DATA
A correct description of the model and of the
serial number of the appliance will allow the
After Sales Service to provide fast and effec-
tive answers.
2.1 Appliance ID Plate
Each appliance is equipped with an iden-
tification plate indicating the main tech-
nical characteristics and serial number.
The ID plate is located on the side of the
COMPACT PIEZO LED module. The com-
plete technical specifications are provid-
ed in Chapter 6 on page 25
NOTE: The complete list of symbols is
provided in Chapter 1.5 on page 5
Additional symbols and characteristics
of the device are provided on a separate
plate. This ID plate is located on the side
of the COMPACT PIEZO LED module.
NOTE: The complete list of symbols is
provided in Chapter 1.5 on page 5
6
Description
For US market only
CAUTION: US federal
law restricts sale to
orders by licensed
dentists or dental
hygienists only.
.
.
.
Symbol Description
a) The symbol is represented by a yellow triangle and
black graphic symbol.
Always provide this information every time
that you contact MECTRON After Sales Ser-
vice.
manufacturer
Mectron S.p.A.
Via Loreto 15/a
16042 Carasco -GE- Italy
compact piezo LeD
04000091
108000000
Bar Code HIBC 128
Protect with Fuse T 2AL, 250V
Use only with adapters or similar as indicated in
the instruction manual.
Device for intermittent operation:
60 s ON - 30 s OFF with irrigation
30 s ON - 120 s OFF without irrigation
24V 50/60 Hz / 32V Min. 40 VA
YYYY-MM-DD
0051 made in Italy
COMPACT PIEZO LED