Stryker PINPOINT T Endoscopic Fluorescence Imaging System PC9000 Benutzerhandbuch Seite 76

When the VPI Options menu is displayed on the monitor, it can be navigated using
the buttons on the PINPOINT camera.
To navigate the VPI Options menu using the PINPOINT camera:
Note: If no menu selection is made within approximately 15 seconds, the VPI Options
menu will timeout and automatically exit.
To access and navigate the VPI Options menu from the VPI front panel:
▪
▪
▪
70
With the VPI Options menu open, navigate by pressing the focus buttons,
(up) and (down).
Press Display Mode button
The control indicators on the front panel of VPI also illuminate to reveal a down
arrow (Illumination button), up arrow (White Balance button) and right arrow
(Menu button). The buttons in the VPI front panel can also be used to navigate
the Options menu directly from the VPI.
Press the Illumination button
Press the Menu button
Press the illuminated Down arrow (Illumination button), Up arrow (White
Balance button) and Right arrow (Menu button) to navigate the menu (see
Figure 47).
To return to a higher level of the menu, select the back item on the monitor,
indicated by " ", and press the Right arrow button to select.
4-0002428 Rev. J
to select the highlighted options in the menu.
on the camera to exit the VPI Options menu.
on the VPI front panel.