Stryker PINPOINT T Endoscopic Fluorescence Imaging System PC9000 Benutzerhandbuch Seite 14

WARNING: Use of this equipment adjacent to or stacked with other equipment should be
avoided because it could result in improper operation. If such use is
necessary, this equipment and the other equipment should be observed to
verify normal operation.
WARNING: Use of accessories, transducers and cables other than those specified or
provided by NOVADAQ could result in increased electromagnetic emissions
or decreased electromagnetic immunity of this equipment and result in
improper operation.
Note: The emission characteristics of this equipment make it suitable for use in industrial
areas and hospitals (CISPR 11 Class A). It is not intended for use in a residential
environment (for which CISPR 11 Class B is required).
For further information and guidance refer to "Guidance and Manufacturer's
Declaration – Electromagnetic Compatibility" included with the PINPOINT System.
If the imaging system becomes unresponsive and does not resume normal function
after turning off and back on, stop using the imaging system, and contact Stryker
Customer Support.
WARNING: NOVADAQ rigid laparoscopes are not designed to provide insulation against
high-frequency (HF) electrical currents. To prevent burns and unintended
thermal injury of surrounding tissue, activate electrodes only when visible
through the laparoscope and avoid contact between active electrodes and
the laparoscope.
WARNING: Do not use the PINPOINT camera if any part of the system is damaged or
does not function properly. Failure to follow this warning may lead to injury.
In the event of a drop or impact, inspect the PINPOINT camera and do not
use it:
➢
➢
➢
If any of the above events occur, please contact Stryker Customer Support.
8
If there is any visible damage to the camera
If there is evidence of sharp edges or exposed pinch points
If there is concern that the impact might have damaged the camera
4-0002428 Rev. J