Stryker PINPOINT T Endoscopic Fluorescence Imaging System PC9000 Benutzerhandbuch Seite 124

Select Mean to set the brightness by weighting the adjustment more by the mean
brightness of the scene and less by the brightest points.
For example, use the Mean setting to set the brightness for viewing objects that are
farther from the front of the laparoscope. Foreground objects may appear too bright
to see detail.
Select Balanced to set the brightness by balancing the Peak and Mean settings.
For example, use the Balanced setting when viewing objects both near to and
farther away from the tip of the laparoscope. Balanced is the default setting and is
suitable for most scenarios.
Default Profile allows the user to return to the settings as originally installed on the
imaging system. The following are the default settings:
Table 13 Default Profile
Display Options
Image Quality
On-screen Info
118
SPY
Overlay
SPY CSF (if available)
Sharpening: 4
Brightness: 192
Red Color Saturation: 768
Blue Color Saturation: 1024
Peak/Mean: Balanced
Off
4-0002428 Rev. J