Stryker PINPOINT T Endoscopic Fluorescence Imaging System PC9000 Benutzerhandbuch Seite 125

Entering the Properties / Service menu displays device-specific information. The
information shown includes:
▪
DSP version
▪
Boot version
▪
FPGA version
▪
LCB version
▪
VPI serial number
▪
PINPOINT camera version
▪
PINPOINT camera serial number
During fluorescence imaging, the imaging system offers up to three different video
display options.
The SPY image display shows only the NIR fluorescence on the monitor in gray
scale. No white-light image is displayed.
The Overlay image display combines the white light image and the NIR fluorescent
image. In this mode, the NIR fluorescence appears green on top of a high-definition
white-light image.
In this imaging display, the white-light image is shown as a gray scale image. The
NIR fluorescent image is color-scaled, with red representing most fluorescence and
blue representing least fluorescence and displayed on top of the white-light image.
In addition, the color scale of fluorescence is shown such that as the distance
between the tip of the laparoscope and the tissue changes, the colors remain
approximately the same. This allows assessment of the fluorescent image at
different imaging distances.
PINPOINT Endoscopic Fluorescence Imaging System Operator's Manual
119