Stryker PINPOINT T Endoscopic Fluorescence Imaging System PC9000 Benutzerhandbuch Seite 55

WARNING: Avoid looking at light emitted directly from the tip of the laparoscope.
In Fluorescence Imaging mode, the VPI provides near-infrared spectrum
illumination through the light guide cable and laparoscope for viewing a
fluorescence image on the system display.
Note: It is recommended that a white balance be performed prior to each clinical
procedure (see Performing a White Balance on Page 44).
To turn on Fluorescence Imaging mode:
▪
From White-light mode, press the Illumination button
camera (see Figure 21).
Figure 21: Illumination button on the PINPOINT camera
▪
▪
PINPOINT Endoscopic Fluorescence Imaging System Operator's Manual
The laser-on indicator LED on the camera and the laser-on indicator on
the front panel of VPI illuminate to indicate that the NIR laser is on (see
Figure 22).
The Overlay mode icon
video image (see Figure 23).
on the PINPOINT
displays in the top-right corner of the
49