Stryker PINPOINT T Endoscopic Fluorescence Imaging System PC9000 Benutzerhandbuch Seite 61

WARNING: Turn illumination off before disconnecting the light guide cable.
To turn off illumination at any time (from White-light mode or Fluorescence Imaging
mode) and return to Standby mode:
▪
Press and hold the Illumination button
OR
Press the Illumination button
The light guide cable can now be safely disconnected from the laparoscope, or
the laparoscope can be safely removed from the patient (without powering off
the VPI).
To shut down the PINPOINT System at the end of a procedure:
Ensure that the system is in Standby mode (see Turning Off Illumination
(Entering Standby Mode)).
If using the Sony video recorder (PC9026), press the Stop button on the
recorder to close the video case.
Press the power button
down and the power indicator glows amber, indicating that the main power
switch on the rear panel is in the on position.
Power off the Sony recorder.
Note: After the PINPOINT System has been used for the first time, the VPI can be
powered off using the power button on the front panel. It is unnecessary to power
off the system using the main power switch on the back of the VPI.
PINPOINT Endoscopic Fluorescence Imaging System Operator's Manual
on the PINPOINT camera.
on the front panel of the VPI.
on the front panel of the VPI. The system shuts
55