Stryker PINPOINT T Endoscopic Fluorescence Imaging System PC9000 Benutzerhandbuch Seite 27

Figure 4: Video Processor / Illuminator rear panel showing connectors and ports
1. Main power switch
2. Device identification label
3. Equipotential post
4. Video format switch
5. RS232 port (Communication port)
CAUTION: The communication ports on the rear panel are intended for use by NOVADAQ
service representatives only.
Note: Normal use of the system does not require the user to connect to the equipotential
post. The potential equalization conductor is only to be used by qualified personnel.
A medical-grade color video monitor can be connected via the SDI and DVI
connectors on the rear panel of the VPI (see Figure 4).
See Table 14 in Appendix C for specifications of the video output signals and
connectors to ensure compatibility of the selected video monitor. Consult the
operator instructions provided by the manufacturer of the video monitor for details
on operation and adjustment of the video monitor.
PINPOINT Endoscopic Fluorescence Imaging System Operator's Manual
6 RJ45 port (Communication port)
7 Ext. sync
8. SDI 1 video out
9. SDI 2 video out
10. DVI video out
21