Product Description - Ottobock C1000 DS Gebrauchsanweisung

Product description
3

Product description

The C1000 DS power wheelchair is suitable for indoor and
outdoor use. The powerful drive system with two 12 V gel
batteries combined with spring-mounted drive wheels al-
lows obstacles to be crossed easily (Category B according
to EN 12184) and offers safe operating performance.
The power wheelchair is controlled by an enAble50 wheel-
chair control system. The latter includes a control panel to
enter driving commands and display the current status as
well as a controller that controls the drive motors and other
electrical functions based on the input data. Data transmis-
sion is realised via a CAN-bus system.
The enAble50 is programmable, which means the control
unit can be customised to individual user requirements. For
example the speed, acceleration and delay values can be
adjusted.
The two steering casters are controlled by separate steering
motors. This considerably improves the driving characteris-
tics, especially on uneven terrain or at higher speeds.
140 Ottobock
|
The steering casters driven by steering motors turn by 90°
or 360° depending on the programming. This results in ex-
cellent manoeuvrability, both indoors and outdoors.
Special features of the C1000 DS include:
n Serviceability due to easy, straightforward access to all
components.
n Individual adaptation possibilities with options and cus-
tom fabrication using modular components (chassis,
seating system, control unit, accessories).
The modular design of the C1000 DS makes it possible to
add other modules and devices in addition to the main com-
ponents (see Figure 1), e. g. electric seat adjustment, special
controls, tray, etc. These options are described in Section 7.
C1000 DS