Display Elements; Labeling - Balluff BIS U-4A7-082-01C-07-S4 Betriebsanleitung

BIS U-4A7-082- _1C-07-S4
Industrial RFID system - Read/write head
4
Product description (continued)
The security status for the EPC, TID and USER memory
banks can be set as follows:
EPC Unlock Lock
TID
USER
Read Allowed Allowed
(EPC, TID,
USER)
Write Allowed Password
(EPC,
USER)
Status Yes Yes
reversible
Details on the different memory banks and the
Lock and Kill functions can be found in the
UHF-RFID standards ISO/IEC 18000-63 and
EPCglobal Class-1 Generation-2.
TM
4.4

Display elements

Balluff Standard (delivery state)
Signal
Green, static The device is ready.
Green, alternating IO-Link communication is active.
with LED off in a
ratio of 10:1, 1 s
period
Red, static General error
Red, static The sensor is currently in Teach-In
mode.
Red, flashing, 3 Hz Short circuit at Pin 2 or Pin 4 (see
chapter 6.3 on page 21).
Yellow, static CP signal (data carrier within RFID
range)
Yellow, flashing, The device is operated outside of
3 Hz specifications.
Orange, flashing, Poor signal quality (number of
1 Hz bad data carrier accesses)
Blue, static Maintenance must be performed.
Blue, flashing, 3 Hz The ping can be activated via a
system command to find the
device again.
Blue, flashing, 5 Hz Reader active
Tab. 4-1: Meaning of the Balluff Standard LED states
www.balluff.com
Unlock Lock
perma- perma-
nent nent
Allowed Allowed
Allowed Locked
No No
Meaning
Namur Standard
Signal
Green, static The device is ready. Diagnosis
functions are on.
Static white The device is ready. Diagnostic
functions are off.
Green, alternating IO-Link communication is active.
with LED off in a
ratio of 10:1, 1 s
period
Red, static General error
Red, static The sensor is currently in Teach-In
mode.
Red, flashing, 3 Hz Short circuit at Pin 2 or Pin 4 (see
chapter 6.3 on page 21).
Yellow, static CP signal (data carrier within RFID
range)
Yellow, flashing, The device is operated outside of
3 Hz specifications.
Orange, flashing, Poor signal quality (number of
1 Hz bad data carrier accesses)
Blue, static Maintenance must be performed.
Blue, flashing, 3 Hz The ping can be activated via a
system command to find the
device again.
Blue, flashing, 5 Hz Reader active
Tab. 4-2: Meaning of the Namur Standard LED states
4.5

Labeling

1)
Order code
1)
Type
2)
3) Serial number
Fig. 4-5: Printing (extract, example)
Meaning
3)
2)
english 11