Program Settings; Interface Settings - Balluff BIS U-4A7-082-01C-07-S4 Betriebsanleitung

BIS U-4A7-082- _1C-07-S4
Industrial RFID system - Read/write head
7
Startup and operation (continued)
Menu
Fig. 7-2: Menu display

Program settings

– L
anguage
Switch menu language between German/English.
– S
witch uSer LeveL
Switching of user roles.
User level
Normal
Service
– i ...
nterface
Opens the window for the interface settings for RS232
/ TCP/IP / UDP.
Device settings
– S
tandby
Is not available when using the BIS U processor unit.
– d /c (F8 key)
iSconnect onnect
Opens or closes the last used connection.
– P ...
arameterS
Opens the parameter window.
– a ...
dvanced ParameterS
Opens the window for advanced parameters (area is
password protected, see menu item Switch user level
on page 23).
– S
yStem SetuP
Area is only accessible to Balluff service staff.
– d
evice tyPe
Shows a list of supported devices and allows manual
selection. Depending on the selected device, the user
interface changes.
The d function is intended for offline
evice tyPe
mode only. The
device tyPe
automatically when the connection is
established.
www.balluff.com
Password
free
service
is selected
Help
– v (F1 key)
iew heLP
Opens the help function for the configuration software.
– a uhf m (Ctrl + I key)
bout anager
Opens the window for user information:
– Software version of the configuration software
– Contact details of Balluff GmbH
Exit
Closes the configuration software.
7.2.3

Interface settings

Via the interface setting, the IO-Link master can be
connected to a Windows PC via a UPD/IP connection.
TM
Opening the UPD/IP connection
1. Menu: Program settings > Interface...
⇒ The Interface Settings window opens.
2. Select UPD/IP tab.
Fig. 7-3: Interface settings
3. Click on c .
onnect
⇒ Connection to the IO-Link master is established.
⇒ Successful connection is indicated by the green
d button.
iSconnect
english 23