Balluff BIS U-4A7-082-01C-07-S4 Betriebsanleitung Seite 150

BIS U-4A7-082- _1C-07-S4
Industrial RFID system - Read/write head
8
System integration (continued)
4. Writing 62 bytes to read/write head, start
address 20
Controller
1. Process output buffer
(note sequence):
0x01 Command recognition 0x02
0x02 Start address 0x14
0x03 Start address 0x00
0x04 Number of bytes 0x3E
0x05 Number of bytes 0x00
0x00/0x1F Set AV bit
3. Process output buffer:
0x01...0x1E Enter first 30 bytes
0x00/0x1F Invert TI bit
5. Process output buffer:
0x01...0x1E Enter another 30 bytes
0x00/0x1F Invert TI bit
7. Process output buffer:
0x01...0x02 Enter last 2 bytes
0x00/0x1F Invert TI bit
9. Process output buffer:
0x00/0x1F Reset AV bit
66 english
Identification system
2. Process input buffer
(note sequence):
0x00/0x1F Set AA bit
0x00/0x1F Invert TO bit
4. Process output buffer:
0x01...0x1E Copy first 30 bytes
Process input buffer:
0x00/0x1F Invert TO bit
6. Process output buffer:
0x01...0x1E Copy another 30 bytes
Process input buffer:
0x00/0x1F Invert TO bit
8. Process output buffer:
0x01...0x02 Copy last 2 bytes
Process input buffer:
0x00/0x1F Set AE bit
10. Process input buffer:
0x00/0x1F Reset AA and AE bits