About This Guide; Other Applicable Documents; Symbols And Conventions; Explanation Of The Warnings - Balluff BIS U-4A7-082-01C-07-S4 Betriebsanleitung

BIS U-4A7-082- _1C-07-S4
Industrial RFID system - Read/write head
1

About this guide

1.1 Validity
This guide provides all the information required for safe use
of the BIS U-4A7-082- _1C-07-S4 UHF-RFID read/write
head (see Type code on page 81) with IO-Link interface.
Read this guide and the other applicable documents
completely before installing and operating the product.
Original User's Guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2021, Balluff GmbH
All content is protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2

Other applicable documents

Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the
following documents:
– Data sheet
– Declaration of Conformity
– Disposal
1.3

Symbols and conventions

Individual action instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Numbers unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
6 english
1.4

Explanation of the warnings

Always observe the warnings in this guide and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
CAUTION
The general warning symbol together with the signal
word CAUTION indicates a hazard which can lead to
slight or moderate injuries.
1.5

Technical terms and abbreviations used

CP Signal Codetag Present (tag present in detection
range) signal
CRC Cyclic Redundancy Check
DC Direct Current
EIRP Equivalent Isotropically Radiated
EMC Electromagnetic compatibility
EPC Electronic Product Code
ERP Effective Radiated Power
FCC Federal Communications Commission
FE Function ground
IC Industry Canada
IODD IO-Device-Description
ISDU Indexed Service Data Unit
ISO International Organization for Standardization
MT Multiple Tags
PC Personal Computer or Protocol Control Word
PD Process Data
RFID Radio Frequency Identification
RSSI Receive Signal Strength Indicator
RFU Reserved for Future Use
Tag RFID data carrier
TID Tag identifier
UHF Ultra High Frequency