Error Codes - Balluff BIS U-4A7-082-01C-07-S4 Betriebsanleitung

BIS U-4A7-082- _1C-07-S4
Industrial RFID system - Read/write head
8
System integration (continued)
8.8

Error codes

Status Functional description
code
0x00 Everything OK.
0x01 Assignment cannot be executed because
there is no data carrier in the range of the
read/write head.
0x02 Reading of data carrier not possible.
0x03 Data carrier was removed from the area of
the read/write head during reading.
0x04 Cannot write to the data carrier.
0x05 Data carrier was removed from the range of
the read/write head during writing.
0x07 No or invalid command identifier with AV bit
set or the number of bytes is 0x00.
0x0D Communication with the read/write head is
interrupted.
0x0E CRC of the read data and CRC of the data
carrier do not match.
0x0F 1st and 2nd bit string are unequal. The 2nd
bit string must be served.
0x20 Addressing of the read/write assignment is
outside the memory area of the data carrier.
0x21 This function is not possible with this data
carrier.
0x30 License key incorrect.
0x31 Invalid parameters set.
0x32 Password required.
0x33 Password invalid.
0x34 Memory range locked.
0x35 Value range of parameter incorrect.
0x36 More than one data carrier in the field of the
antenna (does not apply to the single tag
command)
0x44 Undefined device behavior
0x45 KA bit active, command cannot be executed.
62 english