Function; Display Elements; Labeling - Balluff BES M08EH1-L01C20B-S04G-L04 Betriebsanleitung

BES M08EH1-L01C20B-S04G-L04 /BES M12E_1-L01C_0_-S04G-L04 /
BES M18EH1-L01C_ _ _-S04G-L04
Inductive sensors
4
Product description (continued)
4.1

Function

The sensor detects the presence of a metallic object within
its detection range.
Features:
– SIO mode / IO-Link mode
– Teachable switchpoint
The configuration options include:
– Configurable switching output/switching logic
– Expanded teach functions: two-point mode, fine
adjustment
– Warning upon exiting the working range
– Vibration measurement
– Humidity measurement
– Counter function
– Frequency monitor
– Operating Hours Counters
This device supports condition monitoring
functions. For details, see document IO-Link
configuration under www.balluff.com on the
product page.
4.2

Display elements

Status LED
Signal Meaning
Red, static General error or in teach mode
Blue, static Maintenance must be performed.
Yellow, alternating IO-Link communication is active.
with LED off in a The device is ready.
ratio of 10:1, 1 s
period
Yellow, static The object was detected /
switching point is active
Green, static The device is ready.
Tab. 4-1: LED
For further signals, see document on IO-Link
configuration under www.balluff.com on the
product page.
www.balluff.com
4.3

Labeling

BXXXXXX
1)
CCOOOOOOOOOSSSSS
BXX-XXX-XXX-XXX-XXX-XX
CCOOOOOOOOOSSSSS
BES XXX-XXX-XXX-XXX-XX
BESXXXX
1)
Order code
1)
Serial number
2)
Type
3)
Fig. 4-2: Labeling (examples)
2)
3)
2)
3)
english 9