Product Description; Function; Display Elements; Labeling - Balluff BOS R254K-UUI-PR10-S4 Betriebsanleitung

BOS R254K-UUI-PR/RS/RE10-S4
Photoelectric Sensors
4

Product description

BOS R254K-...-PR10-...
20.40
Lens
Optical axis of
receiver
Optical axis of emitter
M12x1
Fig. 4-1: Dimensions, design and function
4.1

Function

This device supports condition monitoring
functions. For details, see document IO-Link
configuration under www.balluff.com on the
product page.
BOS R254K-UUI-PR10-S4
In the case of a retroreflective sensor, the emitted light is
reflected back to the sensor by a reflector. Interruption of
the light beam by an object causes the switching
operation.
BOS R254K-UUI-RS10-S4
BOS R254K-UUI-RE10-S4
Through-beam sensors are sensors having separate
transmitter and receiver units which must be aligned with
each other on opposite ends of the detection range. When
an object interrupts the light beam, the receiver switches,
i.e. the output signal changes.
www.balluff.com
BOS R254K-...-RS10-...
BOS R254K-...-RE10-...
20.40
Lens
Optical axis
M12x1
49.50
LED 2 LED 1
4.30
4.2

Display elements

LED 1 (operating status and communication)
Signal Meaning
Static red General error
Green alternating IO-Link communication is active.
with LED off at ratio The device is ready. Diagnosis
of 10:1, 1 s period functions are on.
Static green The device is ready.
Tab. 4-1: LED 1
LED 2 (indication/warning/teach/ping)
See document IO-Link configuration under
www.balluff.com on the product page.
4.3

Labeling

1)
2)
3)
Order code
1)
Serial number
2)
3) Type
Fig. 4-2: Labeling (example)
english 7