Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BAE SA-OH-064-_P-DP02 / BAE SA-OH-064-_P-S75G
Photoelectric Sensors
4
Product description (continued)
4.1
Construction
The electrical connection is made via a cable or plug
connection (see Type code on page 16).
4.2
Function
The sensor amplifier serves as a processor unit for Balluff
sensors of the BOH series.
4.3
Operating and display elements
The settings of the amplifier can be changed via the control
panel with the status LEDs.
Switch mode
Resolution switch
switch
(RES)
Delay switch
Rotary potentiometer
Amplification factor
(SENSITIVITY)
Fig. 4-2:
Control panel of the amplifier
4.3.1
Operating elements
Switch
Switch
Position
Function
Dark on
Low active
Switch
mode
Light on
High active
St.
High range (12% hysteresis)
Resolution
High resolution with low range
(RES)
Hi.
(3% hysteresis)
On D
50 ms switch-on delay
Delay
Off
No delay
Off D
50 ms switch-off delay
Tab. 4-1:
Switch
Rotary potentiometer
Rotary
Function
potentiometer
Amplification factor
Setting of amplification factor of
(SENSITIVITY)
electronics
Tab. 4-2:
Rotary potentiometer
www.balluff.com
Power LED (PWR)
'II
'II
Output LED (OUT)
4.3.2
Display elements
LED
Function
Green,
Device ready
static
Power LED
Green
(PWR)
Signal value in hysteresis
flashing
Red, static Error
Yellow,
Switch output switched
Output LED
static
(OUT)
Off
Switch output not switched
Tab. 4-3: Display elements
4.4
Labeling
1)
Alternatives Anschlussbild:
Order code
1)
Type
2)
Serial number
1 - brown +VDC
3)
2 - blue
GND
Fig. 4-3:
Labeling (example)
3 - black
OUT NPN
4 - white
n.c.
2)
3)
english
9
Werbung
Inhaltsverzeichnis
