Product Description; Function; Display Elements; Labeling - Balluff BOS R254K-UUI-LH10-S4 Betriebsanleitung

BOS R254K-UUI-L_1_-S4
Photoelectric Sensors
4

Product description

BOS R254K-...-LH11/LK10/LE10/LS10-...
20.4
17.8
A2
A1
M12x1
Type
LH10/LH11
Optical axis of emitter
LK10
LS10
Optical axis of emitter and receiver
LE10
Fig. 4-1: Dimensions, design and function
4.1

Function

This device supports condition monitoring
functions. For details, see document IO-Link
configuration under www.balluff.com on the
product page.
BOS R254K-...-LH10/LH11-...
In the case of a diffuse sensor with adjustable background
suppression, the emitted light is reflected by the object and
evaluated in the receiver. The background suppression
allows recognition in the detection range that is almost
object-independent.
BOS R254K-...-LK10-...
In the case of a retroreflective sensor, the emitted light is
reflected back to the sensor by a reflector. Interruption of
the light beam by an object causes the switching
operation.
BOS R254K-...-LS10/LE10-...
Through-beam sensors are sensors having separate
transmitter and receiver units which must be aligned with
each other on opposite ends of the detection range. When
an object interrupts the light beam, the receiver switches,
i.e. the output signal changes.
www.balluff.com
49.5
4.3
9.8
LED 2 LED 1
A1
BOS R254K-...-LH10-...
20.4
17.8
A2
A1
M12x1
A2
Optical axis of receiver
–
4.2

Display elements

LED 1 (operating status and communication)
Signal Meaning
Static red General error
Green alternating IO-Link communication is active.
with LED off at ratio The device is ready.
of 10:1, 1 s period
Static green The device is ready.
Tab. 4-1: LED 1
LED 2 (indication/warning/teach/ping)
See document IO-Link configuration under
www.balluff.com on the product page.
4.3

Labeling

1)
Order code
1)
2) Serial number
Type
3)
Fig. 4-2: Printing (extract, example)
49.5
4.3
9.8
LED 2 LED 1
X1 X2
9.3 16.6
15.3 11
32.1
–
30.3
2)
3)
english 7