Inhaltsverzeichnis; Display/Control Elements In The System Settings Menu - B. Braun Aesculap ELAN 4 GA800 Gebrauchsanweisung

en
Display/control elements in the system set-
tings menu
Symbol Designation
Call up the system settings menu
Leave the system settings menu
User profiles
Applied part settings
Control unit settings
Wireless foot control settings
Control unit information
Maximum speed/stroke rate
Speed up
Slow down
Oscillation mode
Oscillation angle
Flow rate
Increase the value
Reduce the value
System volume
Display brightness
System language
4
Symbol Designation
Reset device to factory settings
Go back to menu structure
Call up the submenu
Move down list
Move back up list
Add new user profile
Delete existing user profile
Edit existing user profile
Save user profile
Contents
1. About this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Application Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 Indications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4 Absolute contraindications . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.5 Relative contraindications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Safe handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. Product description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1 Scope of supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 Components required for operation . . . . . . . . . . . . . . . . . . . . .
4.3 Operating principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.1 Control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.2 Display/control concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.3 Explanation with an example . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.4 Applied part types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.5 Identification of control elements on system components . . .
4.3.6 Recognition of connected motor cable and applied part . . . .
4.3.7 Overload protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.8 Coolant and irrigation pump . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. Preparation and setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1 Set-up environment/set-up location. . . . . . . . . . . . . . . . . . . . .
5.2 Stacking of units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6. Working with the ELAN 4 electro system . . . . . . . . . . . . . . . . .
6.1 System set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.1 Connecting the accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.2 Connecting the power supply . . . . . . . . . . . . . . . . . . . . . . . . . .
5
5
5
6
6
6
6
6
6
6
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
9
9
9
9