User Profiles; Motor Settings - B. Braun Aesculap ELAN 4 GA800 Gebrauchsanweisung

en
6.4.1

User profiles

User profiles can be created and edited in the user profiles menu.
Note
When the control unit is restarted, the default profile is loaded automati-
cally.
a
b
c
Fig. 9 User profiles
Legend
a Exit menu
b User profile button
c Import/export user profiles from/to USB stick
d Delete user profile
e Modify user profile
f Create user profile
►
Exit menu: Press "Exit menu" a button.
►
Select user profile: Press the user profile b button.
The active user profile is highlighted in black.
►
Create user profile:
– Press button "Create user profile" f.
– Enter the name of the user profile.
The settings below can be made for every user profile:

– Motor settings

– Device settings
– Oscillation settings (only for drill tool GA844)
►
Modify user profile: Press button "Modify user profile" e.
►
Delete user profile: Press button "Delete user profile" d.
►
Import/export user profiles from/to USB stick:
– Inset USB stick into USB port of the control unit.
– Press button "import/export of profiles" c.
– Press button "import" or "export".
– Follow the instructions on the display.
Note
Profiles must be saved after creation or modification.
►
Save Profile: Press button
14
d e
.
6.4.2 Motor settings
The motor settings menu displays the applied part types, see Fig. 10.
a
f
b
Fig. 10 Motor settings – Overview of applied part types
Legend
a Exit menu
b Buttons for the types of applied parts
►
Exit menu: Press "Exit menu" a button.
►
View/change the motor settings of a type of applied part: Press the type
of applied part b button.
The submenu for the applied part type selected opens, see Fig. 11.
f
e
d
c
b
a
Fig. 11 Motor settings – Selected applied part type
Legend
a Factory reset
b Flow rate of the coolant and irrigation pump
c Slow down rate of the applied part
d Speed up rate of the applied part
e Maximum speed (maximum speed/stroke rate)
f Leave menu
g Reduce value
h Increase value
g h