Function Of The Digital Inputs / Outputs; Md-300; Basic Functions; Inputs; Outputs - TR-Electronic MP-Series Benutzerhandbuch

9 Function of the digital inputs / outputs; MD-300

9.1 Basic functions

9.1.1 Inputs

The four integrated digital inputs provide the function of an additional digital input
module at field level, on the one hand. Signals from e.g. connected sensors or push-
buttons/switches are displayed by means of bit coding via parameter P803 "Digital
Input" and initially have no direct influence on the drive activity.
On the other hand, different functions can be assigned to the digital inputs (see
chapter 9.2.1).
Further information on the digital inputs can be found in the following documents:
● Pin Assignment:
TR-EMO-TI-DGB-0066
● encoTRive Project Engineering Manual:
TR-EMO-BA-DGB-0015

9.1.2 Outputs

The four integrated digital outputs provide the function of an additional digital output
module at field level, on the one hand. By means of the parameter P804
"Digital_Output", the actuators can be controlled directly by the master.
On the other hand, different functions can be assigned to the digital outputs (see
chapter 9.2.2).
Further information on the digital outputs can be found in the following documents:
● Pin Assignment
TR-EMO-TI-DGB-0066
● encoTRive Project Engineering Manual
TR-EMO-BA-DGB-0015
Printed in the Federal Republic of Germany
06/06/2019 TR - EMO - BA - DGB - 0019 - 08
 TR-Electronic GmbH 2008, All Rights Reserved
Page 213 of 252