Herunterladen Inhalt Inhalt Diese Seite drucken

"Cleaning" Function - De Dietrich DOP8785BB Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 116
5
CARE

"CLEANING" FUNCTION

(the cavity)
Remove the accessories and
supports from the oven before
beginning pyrolysis cleaning. Before
starting a pyrolysis cleaning cycle,
make sure that any accessories that
are not pyrolysis safe have been
removed from the oven (sliding rails,
chrome-plated grills, and so on) as
well as any cookware.
PYROLYTIC SELF-CLEANING
This oven is equipped with a pyrolytic
self-cleaning function:
Pyrolysis is a cycle during which the
oven cavity is heated to a very high
temperature in order to eliminate soiling
from splattering and spills.
Before starting pyrolysis cleaning,
remove any large overspills, if any.
Remove the excess grease on the door
using a damp sponge.
As a safety measure, cleaning only
occurs after the door locks automatically;
it is impossible to unlock the door.
PERFORM A SELF-CLEANING
CYCLE
Three pyrolysis cycles are proposed.
The durations are pre-selected and
cannot be modified:
Express Pyro: in 59 minutes
This specific function uses the heat
built up during a previous cooking
cycle to quickly and automatically
clean the inside of the oven:
it cleans a mildly dirty oven
interior in less than an hour.
The electronic oven temperature
monitor determines whether the
residual heat remaining in the oven
interior is sufficient to provide a good
cleaning result. If this is not the case,
a 90-minute pyrolysis cycle will
automatically begin.
Auto Pyro: between
1:30 and 2:15
for cleaning to save energy.
Turbo Pyro: in 2:00
for more in-depth cleaning of
the inside of the oven.
IMMEDIATE SELF CLEANING
- Select the «CLEANING» function when
you are in the general menu then confirm.
- Select the most suitable self cleaning
cycle, for example Turbo Pyro, and
confirm.
The pyrolysis cycle begins. The time
starts to count down immediately it is
set.
During pyrolysis, the
displayed in the programmer to
indicate that the door is locked.
At the end of pyrolysis, a cooling phase
takes place and your oven remains
unavailable during this time.
33
symbol is

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bop7568bbDop7350aDop8574bb

Inhaltsverzeichnis