Product Description; Intended Use; Foreseeable Misuse; Ec Manufacturer's Declaration - GF NeoFlow Betriebsanleitung

Instruction manual
1

Product description

1.1

Intended use

The pilot-controlled NeoFlow pressure reducing valve from Georg Fischer Piping Systems Ltd. was designed for the automatic pres-
sure and flow control in networks for the supply and distribution of potable water.
The NeoFlow pressure reducing valve is designed to fit between standard PN10/PN16 flanges in a wafer-type arrangement. ANSI150
flange compatibility is also available (excl. DN80).

Foreseeable misuse

The NeoFlow pressure reducing valve may not be used as a pure shut-off valve. Media other than potable water as well as water
containing an amount of disinfectant may only be used in consultation with a contact partner from Georg Fischer Piping Systems Ltd..
The use of solid matter in the medium can affect the function of the NeoFlow pressure reducing valve. For this reason, use is only
recommended with an upstream strainer.
1.2

EC Manufacturer's declaration

The manufacturer Georg Fischer Piping Systems Ltd., 8201 Schaffhausen (Switzerland) explains that the NeoFlow pressure redu-
cing valve fully complies with the standard "EN 1074-5 Valves for water supplies."
If the overall system does not comply with the requirements of an EC directive, then putting the NeoFlow pressure reducing valve is
prohibited until the conformity of the overall system with the EC directive has been declared.
Fittings
NeoFlow Pressure reducing valve
Changes to the fittings that could effect the stated technical data and the intended use, void this manufacturer's declaration.
Additional information can be found in "GF planning fundamentals."
Schaffhausen, 08/12/2021
Bastian Lübke
Head of Global R&D
Georg Fischer Piping Systems Ltd.
CH-8201 Schaffhausen (Switzerland)
Involved standards
EN 1074-5
NeoFlow pressure reducing valve
5