OMCN ROLL R6 Betriebsanleitung Seite 62

en 62 | ROLL R6 M | Program structure
8.2.2 Settings
Activation/deactivation of electronic vernier caliper (and
gauge arm for measuring rim width if fitted)
Press <I> to return to the previous page.
Positioning of adhesive weight (electronic vernier
caliper*, manual vernier caliper (3, 6 or 12 o'clock).
Activation/deactivation of electronic vernier caliper (and
gauge arm for measuring rim width if fitted)
+ activates the automatic balancing program recognition
function.
+ does not activate the automatic balancing program
recognition function.
* Special accessories
8.2.3 User-defined settings
Activation and deactivation of personal screen saver
Activates or deactivates
acoustic acknowledgement signal
Language selection.
Activates or deactivates automatic start (start of
measurement by closing wheel guard)
Press < I > to return to the previous page.
Selection of weight display
grams (g) or ounces (oz)
Selection of weight resolution
1 g / 0.05 oz or 5 g / 0.25 oz
Residual value suppression:
Entry of weight value below which the
value "0" is to be displayed.
|
1 695 600 694 2016-09-28
Procedure for activation of personal screen saver
1. Copy the desired image on a USB stick in the main
directory;
$
Image format:
$
Image size:
$
File name:
2. Insert the USB stick at the USB port (Fig. 26);
Fig. 26:
3. Activate the screen saver in the "Screen saver"
menu;
« Confirm with <I>
4. Loading of the image is briefly displayed on the
screen;
« Confirm with <I>.
5. The new screen saver is activated after 10 minutes if
the system has not been used
Bitmap
320 x 240 mm;
SCR_SET.bmp
OMCN spa