User Information; Product Description - Omcn Roll R6 Betriebsanleitung

en 48 | ROLL R6 M | User information
2.

User information

2.1 Important notes
Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions for
OMCN spa Tire Service Equipment". These instructions
must be carefully studied prior to start-up, connection
and operation of the ROLL R6 M and must always be
heeded.
2.2 Safety instructions
All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for OMCN spa Tire Service Equipment".
These instructions must be carefully studied prior to
start-up, connection and operation of the ROLL R6 M
and must always be heeded.
2.3 Electromagnetic compatibility (EMC)
The ROLL R6 M satisfies the requirements of the EMC
directive 2014/30/EU.
The ROLL R6 M is a class B product as per EN 61 326.
|
1 695 600 694 2016-09-28
3.

Product description

3.1 Intended use
The ROLL R6 M is a wheel balancing machine featuring
mechanical wheel clamping for the balancing of car,
light van and motorcycle wheels with a rim diameter of
10" - 27" and a rim width of 1" -
The ROLL R6 M is to be used exclusively for this
purpose and solely for the range of applications
specified in these instructions. Any other purpose is not
consistent with the intended use and is therefore not
permissible.
i
The manufacturer cannot accept any liability for
possible damage arising from improper use.
!
* These measurements refer to standard rims (A); for
particularly shaped rims (B - C) it is recommended
using specific accessories.
3.2 Prerequisites
The ROLL R6 M must be installed on a flat surface
made of concrete or similar material and anchored in
position.
!
An uneven or vibrating surface can lead to
inaccurate unbalance measurements.
!
Any uneven floors or that do not meet the previously
expressed safety requisites relieve the manufacturer
from any liability for damages to persons and/or
property.
20".
OMCN spa