Herunterladen Inhalt Inhalt Diese Seite drucken

Temporary Shutdown; Change Of Location; Disposal And Scrapping - OMCN ROLL R6 Betriebsanleitung

Monitor
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
en
82 | ROLL R6 M | Decommissioning
7. Remove the test weight.
8. Release the wheel and turn it through approx. 35°.
9. Re-attach the wheel.
10. Close the wheel guard.
« Measurement commences.
"
On completion of this reference measurement, the
display must not exceed a maximum unbalance of 10 g
per side (15 g for particularly heavy wheels). This error
may be caused by the rim centering tolerances. If this
reference measurement indicates greater unbalance,
the components used for centering the wheel must
be checked for wear, play and contamination.
|
1 695 600 694
2016-09-28
13. Decommissioning
13.1

Temporary shutdown

In the event of lengthy periods of non-use:
Unplug the electrical connection.
13.2

Change of location

If the ROLL R6 M is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
The ROLL R6 M is only ever to be transported in the
original or equivalent packaging.
Unplug the electrical connection.
Heed the notes on initial commissioning.
Bolt the ROLL R6 M back onto the pallet.
13.3

Disposal and scrapping

13.3.1
Substances hazardous to water
!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
13.3.2
ROLL R6 M
and accessories
1. Disconnect the ROLL R6 M from the mains and
detach the power cord.
2. Dismantle the ROLL R6 M and sort out and dispose
of the different materials in accordance with the
applicable regulations.
ROLL R6 M, accessories and packaging
should be sorted for environmental-friendly
recycling.
Do not dispose ROLL R6 M into household
waste.
Only for EC countries:
The ROLL R6 M is subject to the European
directive 2012/19/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
Make use of the local return and collection
systems for disposal.
Proper disposal of ROLL R6 M prevents
environmental pollution and possible
health hazards.
OMCN spa

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis