7.
Remove the bay intrusion switch.
8. Disconnect all the cables from the backplane.
Schritte
1. Using Phillips #2 screwdriver, remove all the screws securing the backplane.
Abbildung 61. Removing the screws from the backplane
2. Hold the backplane by the edges and remove it from the bay.
Abbildung 62. Removing bay 1 backplane
Nächste Schritte
Replace the drive bay 1
backplane.
Installing the drive bay 1 backplane
Voraussetzungen
Follow the safety guidelines listed in
ANMERKUNG:
The procedure to install the backplane is similar for all backplane configurations.
1. Follow the procedure listed in
84
Installing and removing system components
Safety
instructions.
Before working inside your
system.