Dell EMC PowerEdge R740xd2 Installations- Und Servicehandbuch Seite 60

8. Remove the air shroud.
9. Remove the internal PERC
10. Move the cables out of the way to access the cooling fan cable connector on the system board.
Schritte
1. Press the tabs on the fan cable connector and disconnect the cable from the system board.
2. Remove the cable from the cable retention tabs.
3. Press the blue release tab and lift the cooling fan from the cooling fan cage.
ANMERKUNG: If removing cooling fan 1, remove the fan cable connector from the power interposer board (PIB).
Abbildung 33. Removing cooling fan
60 Installing and removing system components
riser.