Dell EMC PowerEdge R740xd2 Installations- Und Servicehandbuch Seite 159

Nächste Schritte
1. Install the internal PERC card.
2. Install the air shroud.
3. Close the drive bays.
4. Install the system cover.
5. Place the system into the rack. For more information, see the Schieneninstallationshandbuch unter
poweredgemanuals.
6. Install the power supply
7. Open the drive bays, install
8. If removed, install the front bezel.
9. Follow the procedure listed in
units.
all drives, and then close the drive bays.
After working inside your system.
Installing and removing system components
www.dell.com/
159