Installing A Power Supply Unit - Dell EMC PowerEdge R740xd2 Installations- Und Servicehandbuch

1. Follow the safety guidelines listed in
2. Disconnect the power cable from the power source and from the PSU you intend to remove, and then remove the cable from the
strap on the PSU handle.
Schritte
Press the release latch and slide the PSU out of the system by using the PSU handle.
Abbildung 120. Removing a power supply unit
Nächste Schritte
Replace a power supply unit.

Installing a power supply unit

The procedure for installing AC and DC PSUs is identical.
Voraussetzungen
1. Follow the safety guidelines listed in
2. Ensure that both the PSUs are of the same type and have the same maximum output power.
ANMERKUNG: Die maximale Ausgangsleistung (in Watt) ist auf dem Netzteiletikett angegeben.
Schritte
Slide the PSU into the PSU bay until the PSU is fully seated and the release latch snaps into place.
136 Installing and removing system components
Safety instructions.
Safety instructions.