Dell PowerEdge SC1420 Aktuelle Informationen Seite 8

Installing the Memory Cooling Fan and Shroud
CAUTION:
working inside the computer, and protecting against electrostatic discharge.
1
Turn off the system and attached peripherals, and disconnect the system from the electrical
outlet.
2
Open the system.
3
Align the memory cooling fan and shroud tabs with the holes on the back panel.
See Figure 1-1.
Figure 1-1. Installing the Memory Cooling Fan and Shroud
4
Insert the tabs and lower the memory cooling fan and shroud until it snaps into place.
5
Connect the memory cooling fan and shroud power cable to the system board. See Figure 1-1.
6
Close the system.
7
Reconnect the system to the electrical outlet, and turn on the system.
6
Information Update
See your System Information Guide for complete information about safety precautions,
shroud tabs (4)
cooling fan
and shroud
power cable