Dell EMC PowerEdge R740xd2 Installations- Und Servicehandbuch Seite 152

Abbildung 133. Replacing the cable chain side cover and the bottom screws
5. Replace the screws for the left and right white plastic rail stops.
ANMERKUNG: Make sure the left control panel cable is routed through the cable chain base bracket and connect the
cable connector to the system board connector.
Abbildung 134. Replacing the screws for the left and right white plastic rail stops
6. Align the support bar to the chassis and replace all the screws.
7. Align the bay 2 backplane bracket to the cable chain assembly and replace the screws.
152 Installing and removing system components