Air Shroud; Removing The Air Shroud - Dell Emc Poweredge R740Xd2 Installations- Und Servicehandbuch

Abbildung 22. Installing system cover
Nächste Schritte
1. Close the drive bays.
2. Place the system into the rack. For more information, see the Schieneninstallationshandbuch unter
poweredgemanuals.
3. Open the drive bays, install
4. Install the power supply
5. Follow the procedure listed in

Air shroud

Removing the air shroud

Voraussetzungen
VORSICHT: Betreiben Sie das System niemals mit entferntem Kühlgehäuse. Das System kann andernfalls schnell
überhitzen, was zum Abschalten des System und zu Datenverlust führt.
1. Follow the safety guidelines listed in
2. Power off the system and all attached peripherals.
3. Disconnect the system from the electrical outlet, and disconnect the peripherals.
4. Open the drive bays, remove
5. Remove the power supply
6. Remove the system from the rack and place it on an ESD work bench. For more information, see the Schieneninstallationshandbuch
unter www.dell.com/poweredgemanuals.
7. Remove the system cover.
8. If installed, remove the butterfly
Schritte
Lift the air shroud away from the system.
all drives, and then close the drive bays.
units.
After working inside your
Safety instructions.
all drives, and then close the drive bays.
units.
riser.
system.
Installing and removing system components
www.dell.com/
51