Dell EMC PowerEdge R740xd2 Installations- Und Servicehandbuch Seite 158

Abbildung 140. Aligning the right control panel cable
2. Extend bay 2 and pull the cable through the side of the bay.
3. Route the cable through the right control panel cable clip and push the cable connector through the side of the fan cage.
4. Connect the control panel cable to the connector on the system board and close the blue release clip.
5. Using a Phillips #1 screwdriver, tighten the screws to secure the right control panel assembly to the system.
Abbildung 141. Installing the right control panel
158 Installing and removing system components