Abbildung 48. Installing a 2.5-inch drive into a 3.5-inch drive adapter
Removing a 3.5-inch drive adapter from a 3.5-inch drive
carrier
Voraussetzungen
1. Follow the safety guidelines listed in
Schritte
1. Using a Phillips #1 screwdriver, remove the screws from the rails on the drive carrier.
2. Lift the 3.5-inch drive adapter out of the 3.5-inch drive carrier.
Abbildung 49. Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
Safety
instructions.
Installing and removing system components
73