Dell EMC PowerEdge R740xd2 Installations- Und Servicehandbuch Seite 117

Abbildung 96. Removing the filler bracket
ANMERKUNG: Store the filler bracket for future use. Filler brackets must be installed in empty expansion card slots
to maintain FCC certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
3. Holding the card on the edges, align the card with the expansion card connector on the system board.
4. Press the expansion card firmly into the expansion card connector on the system board until the card is fully seated.
5. Close the retention latch by pressing the latch down until the latch snaps into place.
Installing and removing system components 117