Dell EMC PowerEdge R740xd2 Installations- Und Servicehandbuch Seite 102

Abbildung 78. Installing the processor bracket
3. If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth.
4. Use the thermal grease syringe included with your processor kit to apply the grease in a quadrilateral design on the top of the
processor.
VORSICHT: Applying too much thermal grease can result in excess grease coming in contact with and contaminating
the processor socket.
ANMERKUNG: The thermal grease syringe is intended for single use only. Dispose the syringe after you use it.
Abbildung 79. Applying thermal grease on top of the processor
5. Place the heat sink on the processor and push down on the base of the heat sink until the bracket locks onto the heat sink.
ANMERKUNG:
• Ensure that the two guide pin holes on the bracket match the guide holes on the heat sink.
• Do not press on the heat sink fins.
102 Installing and removing system components