Restoring The System Using Easy Restore; Trusted Platform Module; Upgrading The Trusted Platform Module - Dell EMC PowerEdge R740xd2 Installations- Und Servicehandbuch

a. Use the Easy Restore feature to restore the Service Tag. For more information, see the
section.
b. If the Service Tag is not backed up in the backup flash device, enter the Service Tag manually. For more information, see the
Manually update the Service Tag
c. Update the BIOS and iDRAC versions.
d. Re-enable the Trusted Platform Module (TPM). For more information, see the
9. Import your new or existing iDRAC Enterprise license.
For more information, see Integrated Dell Remote Access Controller User's Guide, at iDRAC-Benutzerhandbuch unter
idracmanuals .

Restoring the system using Easy Restore

The easy restore feature enables you to restore your service tag, license, UEFI configuration, and the system configuration data after
replacing the system board. All data is backed up in a backup flash device automatically. If BIOS detects a new system board, and the
service tag in the backup flash device, BIOS prompts the user to restore the backup information.
Info über diese Aufgabe
Below is a list of options available:
• Restore the service tag, license, and diagnostics information, press Y
• Navigate to the Lifecycle Controller based restore options, press N.
• Restore data from a previously created Hardware Server Profile, press F10
ANMERKUNG: When the restore process is complete, BIOS prompts to restore the system configuration data.
• To restore the system configuration data, press Y
• To use the default configuration settings, press N
ANMERKUNG: After the restore process is complete, system reboots.
Manually update the Service Tag
After replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using System Setup.
Info über diese Aufgabe
If you know the system service tag, use the System Setup menu to enter the service tag.
Schritte
1. Power on the system.
2. To enter the System Setup, press F2.
3. Click Service Tag Settings.
4. Enter the service tag.
ANMERKUNG: You can enter the service tag only when the Service Tag field is empty. Ensure that you enter the
correct service tag. Once the service tag is entered, it cannot be updated or changed.
5. Click OK.

Trusted Platform Module

Upgrading the Trusted Platform Module

Voraussetzungen
1. Follow the safety guidelines listed
2. Power off the system and all attached peripherals.
3. Disconnect the system from the electrical outlet, and disconnect the peripherals.
4. Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
5. Open the drive bays, remove
144 Installing and removing system components
section.
Safety instructions.
all drives, and then close the drive bays.
Restoring the system using Easy Restore
Re-enabling the TPM for BitLocker users section.
www.dell.com/