Verschiedene Einstellungen - Dell EMC PowerEdge R740xd2 Installations- Und Servicehandbuch

Option Description
Redundant OS
Boot
When set to Enabled, BIOS boots to the device specified in Redundant OS Location. When set to Disabled,
BIOS preserves the current boot list settings. This option is set to Enabled by default.

Verschiedene Einstellungen

Sie können über den Bildschirm Miscellaneous Settings (Verschiedene Einstellungen) bestimmte Funktionen durchführen, z. B. die
Aktualisierung der Systemkennnummer oder das Ändern von Datum und Uhrzeit des Systems.
Viewing Miscellaneous Settings
To view the Miscellaneous Settings screen, perform the following steps:
Schritte
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
ANMERKUNG: If your operating system begins to load before you press F2, wait for the system to finish booting,
and then restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Miscellaneous Settings.
Miscellaneous Settings details
Info über diese Aufgabe
The Miscellaneous Settings screen details are explained as follows:
Option Description
System Time Enables you to set the time on the system.
System Date Enables you to set the date on the system.
Asset Tag Specifies the asset tag and enables you to modify it for security and tracking purposes.
Keyboard Enables you to set whether the system boots with the NumLock enabled or disabled. This option is set to On by
NumLock default.
F1/F2 Prompt on Enables or disables the F1/F2 prompt on error. This option is set to Enabled by default. The F1/F2 prompt also
Error includes keyboard errors.
Load Legacy Video Enables you to determine whether the system BIOS loads the legacy video (INT 10H) option ROM from the video
Option ROM controller. Selecting Enabled in the operating system does not support UEFI video output standards. This field is
available only for UEFI boot mode. You cannot set the option to Enabled if UEFI Secure Boot mode is enabled.
This option is set to Disabled by default.
Dell Wyse Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to Enabled by default.
P25/P45 BIOS
Access
Power Cycle Enables or disables the Power Cycle Request. This option is set to None by default.
Request
ANMERKUNG: BIOS will disable the device in hardware, so it cannot be accessed by the OS.
ANMERKUNG: This option is disabled if Redundant OS Location is set to None or if Redundant OS
State is set to Hidden.
ANMERKUNG: This option does not apply to 84-key keyboards.
Pre-operating system management applications 43