Drive Bay; Opening The Drive Bays; Closing The Drive Bays - Dell Emc Poweredge R740Xd2 Installations- Und Servicehandbuch

Drive bay

Opening the drive bays

Voraussetzungen
VORSICHT: Drive bays should not be in service position for more than 5 minutes because of thermal concerns. When the
drive bay is open for more than five minutes, the cooling fans spin at a higher speed to provide extra cooling to the
system. Thus system health status changes from the normal to critical state, and system event "The BP1 drive bay is
kept open for an extended period of time" is logged.
1. Follow the safety guidelines listed in
2. If installed, remove front
Schritte
1. If locked, unlock the drive bay lock located above the left release latch, by pushing it up.
2. Open the release latches of drive bay 1 and pull the drive bays out.
Abbildung 39. Opening the drive bays
Nächste Schritte
1. If installed, remove a drive blank
2. If installed, remove a drive carrier

Closing the drive bays

Voraussetzungen
1. Follow the safety guidelines listed in
2. If installed, remove front
Safety instructions.
bezel.
or install a drive blank.
or install a drive carrier.
Safety instructions.
bezel.
Installing and removing system components 65