Amd Powernow! Feature Not Supported On Opteron Dual-Core Processors (Family 0Fh); External Usb Diskette Drive Behavior During System Startup; Trusted Platform Module (Tpm) Update; System Power Cable Requirements - Dell PowerEdge R905 Aktuelle Informationen

AMD PowerNow!™ Feature Not Supported
on Opteron Dual-Core Processors (Family 0Fh)
Due to an incompatibility issue between Opteron dual-core processors
(Family 0Fh) and the system chipset, failures of processor power transitions
can occur if the AMD PowerNow! feature is enabled.
Consequently, the PowerNow! feature is not available with these processors,
and the Demand-Based Power Management option is not displayed in the
System Setup program.
NOTE:
The PowerNow! feature may be used with Opteron quad-core (Family 10h)
processors.
External USB Diskette Drive Behavior During
System Startup
Certain models of external USB diskette drives may not be recognized by the
operating system during system startup. If this problem occurs, unplug and
reinsert the drive cable to prompt the operating system to recognize the drive.

Trusted Platform Module (TPM) Update

Systems shipping in China are not equipped with TPM. Disregard any TPM
options listed in the "Using the System Setup Program" chapter of your
Hardware Owner's Manual.

System Power Cable Requirements

If you purchased your system without a power cable, you must provide
a power cable approved for use in your country. that meets or exceeds
the voltage requirements of your system and is rated for 10A or more.
NOTICE:
Do not use a power cable with a current rating of less than 10A.
8
Information Update