BD Veritor System Bedienungsanleitung Seite 7

Step 4:
• Remove the swab while squeezing the sides of the tube to extract the liquid from
the swab. Properly discard of the swab.
Step 5:
• Press the attached tip firmly onto the RV Reagent D tube containing the processed
sample (threading/twisting not required).
• Vortex or mix thoroughly by swirling or flicking the bottom of the tube before adding
to assay device.
• Note: Do not use tips from any other product, including other products from BD or
other manufacturers.
After step 5, choose from the model and workflow option below before continuing to step 6:
Instructions in
section:
BD Veritor Reader or
Analyzer in
Analyze Now mode
A
BD Veritor Plus
Analyzer in
Walk Away mode
B
7
BD Veritor Plus Analyzer with the
BD Veritor InfoScan module in
Analyze Now mode–or–Walk Away mode
C D